home :: product info

Spatz Instructions

Bottom of cleats

Top of cleats

Screw-In Cleats

  1. Unscrew spikes from the bottom of the shoe.
  2. Place the shoe inside of the Spatz™, pulling the toe of the cleat, through the toe of the Spatz™.
  3. Line up the zipper centered over the shoelaces.
  4. Make your costume holes by screwing in the spikes through the Spatz™.
  5. Remove any debris that may clog the spike holes, then replace spikes and tighten with the cleat wrench.

Molded or Spiked Cleats

  1. Starting with your cleats on, pull the Spatz-molded cleat cover over cleats and zip up the back.
  2. Adjust cleat cover to insure fully exposed cleats/spikes.

MACHINE WASH WITH LIKE COLORS
TUMBLE DRY LOW HEAT

Spatz are made in Taiwan
Patent # US D456,122 S